Start Ledger Live Nano S Plus Setup
For Ledger Live Nano S Plus setup, prepare a supported computer and a USB data cable before opening onboarding. The companion application is now named Ledger Wallet, formerly Ledger Live. Nano S Plus has no Bluetooth, so instructions that ask you to pair it wirelessly apply to a different model. Its USB connection carries both power and the data required to communicate with the application.
Choose a Supported Setup Platform
Visit Ledger’s setup page to obtain the appropriate app and check current requirements. A compatible desktop computer is a straightforward starting point. Supported Android connections require an appropriate data-capable OTG arrangement. Do not assume the presence of a USB-C socket on an iPhone makes Nano S Plus a supported wired iPhone wallet.
Connect and Learn the Buttons
Connect the device directly where possible, then read its display. The two buttons move through choices, and pressing both confirms as shown in onboarding. Enter and confirm your chosen PIN on the Nano S Plus itself. The computer’s application lock, if enabled, is a separate setting and should not be confused with the hardware PIN.
Decide Whether the Wallet Is New
If this is a new wallet, follow the option to set up a new device. The hardware generates the recovery phrase and displays it on its screen. If the Nano S Plus already manages your existing accounts, connect it as an existing device instead. Installing the application again on a computer does not require initializing the hardware again.
Intentional restoration is a separate task. Recovery words must be entered on the hardware device, following official model instructions. Never paste a recovery phrase into the companion application, browser, terminal, or a document shared with support. Neither a USB connection repair nor adding an account needs you to disclose those words.
Make an Offline Recovery Backup
Write down each word in its numbered order and complete the device’s confirmation exercise. Keep the resulting backup private and offline. Do not use a prewritten phrase included by a seller, a website, or another person. If a supposedly new device arrives already configured with a PIN or supplied phrase, stop onboarding and contact official support.
Install Device Apps and Add Accounts
Complete the app’s genuine check and follow any appropriate device OS update prompt. Use My Ledger to install the blockchain app needed for the asset you want to manage. Next, add the corresponding account in the application. An installed blockchain app alone does not populate every account or make every token visible automatically.
Check Receiving Before Funding
Select the intended account and network, begin the Receive flow, and compare the address shown on the Nano S Plus with the address in the app. Confirm the whole address, rather than only a few characters. When sending from an exchange, match its withdrawal network to the account network. A first small transfer can test the route, subject to fees and platform limits.
Frequently Asked Questions
Why does my phone not find Nano S Plus over Bluetooth?
The model does not support Bluetooth. Refer to Ledger’s Nano S Plus FAQ for supported connection methods.
What if the device turns on but the app cannot connect?
Try a known data cable, another direct port, and the platform’s official USB troubleshooting. Power alone does not show that the cable transfers data, and a hardware reset is not a routine USB fix.
Leave a Reply